04Specification

One film,
one set of numbers.

One construction, one thickness, one roll width across the whole range, so a scheme can mix concrete, timber and marble without changing details, adhesives or fire strategy.

Specification

The same data sheet
for every finish.

One construction, one thickness, one roll width across the whole library, so a scheme can mix concrete, timber and marble without changing details, adhesives or fire strategy.

Thickness
250 µm
Roll width
1220 mm
ASTM E84
Class A
Film warranty
10 yr
ConstructionPrinted, embossed film with pre-applied air-channel pressure-sensitive adhesive
Thickness250 µm
Roll size1220 mm wide × 50 m (48 in × 164 ft). Premium Painted Concrete rolls are 40 m (131 ft); Real Fabric rolls are 30 m (98 ft); Leather rolls are 40 m (131 ft)
Fire performanceClass A (Class 1) to ASTM E84; B1 not-easily-flammable to DIN 4102-1
EnvironmentalVOC-free; resistant to mould and fungus
Warranty10 years on the film; 5 years on installations by Surphetta certified installers
SubstratesWood, MDF, painted drywall, metal, glass, laminate and plastic, correctly prepared
ApplicationsWalls, ceilings, doors and frames, casework, columns, reception joinery, lift interiors and commercial fit-out

Figures published by the manufacturer. Confirm current specification and certification for the project of record.

Test data

Published test data
for your submittal.

The manufacturer's results for the interior film line. Figures describe the material as tested. Reports are issued per finish series: tell us the code and the occupancy and we send the matching report before it goes on a drawing.

Published test data for the interior film
PropertyResultMethod
Pencil hardness3HASTM D3363 (750 g)
Abrasion loss15.1 mgISO 9352, CS-10 wheel, 1,000 g, 1,000 cycles
Peel adhesion7.83 N/mm at 30 min, 10.29 N/mm at 24 h, 6.71 N/mm after ageingKS T 1028, 180° peel from steel
Elongation at break220% transverse, 80% machineKS T 1028
Tensile strength42.9 N/10 mm transverse, 60.2 N/10 mm machineKS T 1028
Right-angle tear21.0 N transverse, 18.8 N machineKS M 3505
Stain resistanceNo change after 24 h contact: coffee, cola, wine vinegar, olive oil, ethanol, acetone, 5% acetic acid, 5% ammonia, 0.5% detergent and othersManufacturer test series
Global warming potential1.96 kg CO₂ eq./m²Environmental Product Declaration
Application temperature12 to 38 °C (54 to 100 °F); full adhesive strength in 3 to 7 daysManufacturer guidance

Compliance

ASTM E84 Class A

Interior finishes across the range for US interior use. Also reported to CAN/ULC-S102 and DIN 4102-1 (B1).

Lift interiors

ASME A17.1, CSA B44 and TSSA recorded in the manufacturer's bulletin.

Material content

Cadmium, lead, mercury and hexavalent chromium not detected. Phthalates under 50 mg/kg. No formaldehyde released.

Need the data sheet or a test report for a submittal? Tell us the finish and the occupancy. Ask for a test report

Talk to our team

Tell us about the space.

The Spartan Surfaces team will get back to you, with samples of the finishes you like.

Contact us

Finish library · Designer Select 2026/2027

125 finishes

Looking for a specific colour, grain or stone? ask us to match it.